|
IPCOMServer 3.0
|
| IPCOMServer is a Telnet server that runs on the Windows 95,98 and ME platforms. It provides the user with a direct connection between a Telnet client and a given serial port (COM1..X). |
| Other software from this author: | - Lettris 2.0 — Lettris is a word game. Letter blocks are dropped from the top of the screen. Letters must be placed on the playing field so that words will be recognised by the game dictionary. When a word is spelled correctly a score will be awarded.
- TIGME RCalc 1.0 — Helps you to calculate an unknown resistor value.
| | Show all software from this author |
Description:
IPCOMServer is a cheap and easy solution to control RS-232 devices without the use of expensive router products like a Cisco® 2511 Terminal server. The IPCOMServer acts as a Telnet server, connecting the user directly to a chosen COM port. IPCOMServer can be connected to by either using a Telnet program or a custom written Telnet Client. A Telnet program will provide the user with a text interface to interrogate the attached RS-232 device. The reason why IPCOMServer was developed was to enable a user to control custom built electronic equipment, or to access remote control test equipment like, TTC Fireberd 4000® or Protocol Analyzers etc.
IPCOMServer acts as a virtual connection between a TCP/IP port or socket and a personal computers Serial/COM port. When a Telnet program or client connects to IPCOMServer, it will be connected directly to the serial port specified in the Setup of IPCOMServer. Strings of data or commands that are generated at the Client will be transported across the TCP/IP network to the Host. At the host the incoming commands are relayed to the serial port. The device attached to the host will react on the commands by sending replies back to the host, which are then relayed back the client. The replies can be used to display either text form or to update a graphical user interface (GUI). See the application notes for more information. | System Requirements:
586, 8MB Ram, One available COM port, Network connection | Change Info:
Set IPCOMServer in client or server mode... Static connections from serial to network devices. | | IPCOMServer 3.0 Download from tigme.com |
| Similar software: | - Docklight RS232 Terminal - RS232 Monitor 1.6 — Docklight is a test, analysis and simulation tool for serial communication protocols (RS232, RS485/422 and others). * Simulating serial protocols * Logging RS232 data * Detecting specific data sequences * Responding to incoming data
- Easy Control 2.0 — Basic like script engine for building Windows applications, targeted to serial and TCPIP comms. Very versatile and easy to use, it is a cheap but powerful platform for virtual instrumentation or general purpose developing.
- TelnetXQ Server 2.6.2 — TelnetXQ is Telnet Server offering enterprise level features, including: access logging, configurable ports, maximum users, maximum logon attempts, welcome/exit banner, maximum users banner, ability to add/delete users and more.
| | Find all software similar on IPCOMServer 3.0 |
|
